The stainless steel gutter system is easy to install. In order to fix it correctly on the roof of the house, you should take a responsible approach to the choice. Despite the strength and durability of the structures, it is recommended not to lose sight of the nuances of using each type of parts.
Device and technical characteristics of metal gutter systems
- Practicality - the products are easy to care for and durable. In addition, they do not require professional installation skills.
- Durability - a properly fixed structure will last more than a dozen years, will not fade in the sun and will not deform after frost.
- Impact resistance - in the event of a fall, the structure will not suffer, there will be no dents on it after being pressed down for the purpose of fastening.
- Resistance to corrosion - the metal structure is covered with polymer, so the constant exposure to moisture and dampness is not scary for it.
- Fire resistance - when heated with an open fire, the gutter system does not change color and does not change its structure.
The protective layer is the main factor to look out for. If it does not exist, the service life of the installation will be significantly reduced.
The device of the finished gutter system is a complete structure. It includes the following details:
- a certain number of plugs (depending on the variety);
- couplings and clamps for reliable fastening of joints and fixing the structure to the frame of the house;
- nozzles of different diameters and rotary structures;
- storm water inlets, funnels, mesh baskets;
- drippers, useful for melting snow - they delay precipitation, freeing up the free passage of water through the canals.
A high-quality drain will be performed if all structural elements, including sealant, are correctly applied.
Features of installation and operation
The assembly of the waste water circuit is carried out according to the type of construction. The main condition is not to combine used parts with new ones, as they may not correspond in size. There are also several important aspects to consider in the design, installation and further use of effluents.
- It is necessary to carry out the installation according to the principle "from top to bottom". Initially, the gutters are attached to the roofing boards, and then the risers are formed. If it is necessary to use rigid and heavy structures, it is better to use deeper brackets. However, they are installed in the rafters before the last stage of the roof organization.
- The entire structure to the riser starts from the funnel. Towards the bottom, the system should become sloping so that water does not linger in the middle of the system and does not stagnate.
- When fixing the gutters, it is necessary to visually orientate so that the roof descends by a third of the width of the receiver, otherwise, the gutter structure will be useless.
- It is imperative that one funnel with a riser must be fixed for each attached gutter. If the roof has a complex pattern, two or three are allowed.
- Fasteners in the wall should be installed so that each running meter of the riser approaches the wall by 2-2.55 mm.
If the edge of the roof is not made horizontally, the marking of the gutter must first be done on the drawing, and then applied during fastening.
Advantages and disadvantages
The metal drainage system has gained great popularity due to its main advantages. These include:
- suitability for use in various climatic conditions;
- ease of care and easy cleaning;
- attractive appearance;
- acceptable cost;
- easy installation.
However, such designs tend to have some disadvantages:
- after cutting, galvanized steel can rust;
- pieces of ice and hail can damage the protective layer of the structure;
- debris is constantly contained inside due to frequent joints.
When buying, the main emphasis should be on the selected type of roofing. For slate, metal ebbs are suitable, for bituminous or andulin tiles, it is better to purchase plastic structures.
The cost of metal gutters
Prices for metal gutter systems can vary depending on what type of metal they are made of. Galvanized steel will cost several times cheaper than copper systems.
Since the design is type-setting, you will have to buy one part at a time. The approximate cost will be as follows:
- funnels up to 250 rubles. a piece;
- gutters up to 600 rubles. per running meter;
- corners and connectors up to 250 rubles. a piece;
- clamps and brackets up to 300 rubles. a piece.
In general, for the organization of the drainage system, you need to financially prepare, since the total cost of the structure will depend on the roof area of your house.
