Climer is a leading company in the supply of HVAC equipment to the countries of the former CIS. It is a reliable and well-established manufacturer that supplies to the markets only products that are in demand, fully adapted to operation in the climatic conditions of the middle zone. Air conditioners of various types are produced and sold under the Klimer brand: monoblocks - devices without an external unit and modern functional split systems.
Lines of manufactured air conditioners
The Climer range of climatic equipment is not too wide and is limited to only a few lines. On sale you can easily find Klimer air conditioners of the Sx, tx and vx models. These are split systems and block devices installed on the wall.
Split systems Climer
The Climer split system also has an external unit, which is located outside the air-conditioned room. There is a radiator for cooling the refrigerant. The compressor compresses the refrigerant and circulates it between the units. The powerful fan cools the system itself and prevents it from overheating. Unlike the indoor unit, the outdoor unit may make noise due to the intensive fan operation. Therefore, it is preferable to place it outside - outside the room.
The set of functions of the split system is determined by the capabilities of the selected model:
- cooling;
- heating;
- filtration of streams, removal of odors;
- saturation with aromas, ions;
- humidity control.
The capabilities of a particular model are prescribed in the instructions for use. Split systems operate in both cooling and heating modes. However, it is advisable to use the "heating" function only during the off-season. At sharply negative temperatures, it is forbidden to use a split system for heating according to the instructions, as this can lead to damage.
Operating modes are set at the request of users. The devices can operate according to the specified parameters, maintaining a certain air temperature during the entire operating period. There is also a timer that allows you to turn on or off the split system at the right time. Some models also have a "night" mode, designed specifically to adapt to the needs of the user during sleep: noise reduction, backlight dimming, etc.
Air conditioners without outdoor unit
The advantages of the line include mobility and the absence of a bulky block that needs to be displayed on the facade of the building, lightweight and short-term installation. Disadvantages: noise emitted during operation, limited functionality. Monoblock is preferable to use in a room with a small area.
Comparison of characteristics of popular models
| Name | VX 25 | TX 23 | CM-09 G1 |
| A type | Split system | Monoblock | Split system |
| Cooling capacity | 2640 Wt | 2300 Wt | 2635 Wt |
| Heating power | 2780 Wt | 2300 Wt | 2750 Wt |
| Power consumption | 680 Wt | 820 Wt | 780 Wt |
| Remote controller | there is | there is | there is |
| functional | Heating, cooling, fan, timer, drying | Heating, cooling, fan, drying | Heating, cooling, fan, night mode |
Climer Control Panel and Air Conditioners Instructions
Using the remote control for the Klimer air conditioner, you can adjust the parameters, select the desired mode, enable or disable additional functions, when you are anywhere in the room. The remote control is necessary in order to make the process of using the device as comfortable as possible for the user. The range of the remote control is not the same for different devices. The individual parameters of the model are indicated in the instructions. For proper operation of the remote control, it is necessary to monitor the timely replacement of the batteries in the device. The battery status is monitored on the display.
Climer air conditioner error codes
Most modern models of Klymer air conditioners have a self-diagnosis function. The fact of its presence is indicated by a corresponding note in the instructions for air conditioners. Self-diagnosis is an independent determination of the type of malfunction by the system and displaying the code on the display. Each code corresponds to a specific error. The self-diagnosis function greatly simplifies and speeds up the process of identifying the cause of the problem and allows the technician to quickly decide whether to transport the device to a service center or whether the system can be debugged on site.
The reasons for the breakdown can be very different. Perhaps a mistake was made when installing the air conditioner, or the requirements for operation were not met. Malfunctions are possible due to frequent power outages, emergency power off. Operation in heating mode at subzero temperatures below the maximum permissible values specified in the instructions. Breakdowns can happen for no apparent reason.
Error codes are highlighted on the display, where the set mode is displayed in the operating state. All that remains for the master to do is to verify the code with the available data and take measures to eliminate the breakdown. So, there is no need to transport the split system to the workshop for diagnostics. Very often it is possible to replace worn-out elements with new ones directly on the spot.
User reviews
After examining the reviews about Climer air conditioners, you can see that most users highlight the following advantages and disadvantages of the HVAC equipment of this brand.
Benefits:
- high availability - availability of inexpensive models;
- you can buy HVAC equipment in most specific stores;
- the development of models is carried out taking into account the needs of the consumer - the presence of only the necessary functions;
- reliability and durability of devices.
Disadvantages:
- only a few lines of climatic equipment go on sale;
- high noise level during the operation of monoblock devices.
Considering the information contained in reviews about technical devices, it will be easier for the buyer to conclude that it is advisable to purchase climatic equipment of this brand.
