Galanz was founded back in 1978. Since that moment, the direction of activity has changed several times - the production shops for the manufacture of textiles were redesigned and supplemented with equipment for the production of household, and then climatic equipment. The production of air conditioners of various lines was put on stream only in 2000. De Lux air conditioners were actively produced and sold. Already in 2003, the largest production complex in China was opened in the city of Zhunshan. Also, since 2005, a research center for the development of new climatic equipment has been successfully operating. This allows you to continuously improve the quality of products, improve and refine existing models of air conditioners and work on the production of new high-tech equipment.
Main lines of split systems
Galanz inverter split systems are suitable for installation within an apartment, house or office. Also, the operation of powerful models is acceptable in premises with a large area: halls of cafes or restaurants.
The device consists of several blocks and functional elements:
- an external unit (mounted outside the room) where the compressor is located;
- interior block made in a design style - placement directly in the room;
- pipes;
- electrical wires;
- console mechanism.
The outdoor unit does most of the work of cooling or heating the air flow. It is equipped with a fan, devices for removing condensate, hot air. Indoor is required for air intake from the room and evaporation. It is located directly in the room and has a stylish design. The indoor and outdoor units are interconnected by wires and pipes. Control and setting of parameters are carried out remotely. For this, a remote control for the air conditioner of the selected model is used.
- heating in cool weather (not lower than the temperature indicators specified in the instructions);
- air cooling;
- removal of excess moisture from the air;
- moisturizing until certain indicators are reached;
- air purification from dust particles;
- removal of odors;
- aromatization of the air;
- ionization;
- blowing off without heating or cooling.
The system can be controlled remotely using the remote control. The device works in automatic mode, maintaining a favorable indoor climate. Most of the split systems, such as the Galanz Galaxy air conditioner, can turn off by a timer and have a self-diagnosis function for faults. By adjusting the position of the flaps, you can change the direction of air flows, as well as use the system as a fan.
Comparison of characteristics of popular models
| Name | galanz msg 26ah | galanz aus 09p53k13 d75 | galanz aus 18h53r120d3 |
| Noise level | Up to 39dB | Up to 34dB | Up to 50dB |
| Power (cooling) | 2.63kW | 2,55kw | 5.2kW |
| Power (heating) | 2.7kW | 2.7kW | 5.5kw |
| Additional functions | Ionization, timer operation, air drying, night mode, turbo mode | deodorizing filter, air flow direction adjustment, memory function, ionization | Memorization of settings, blowing without cooling and heating |
Galanz control panel and air conditioners manuals
Modern split systems are remotely controlled. In order to turn on the galaxy air conditioner or select a suitable mode, it is not at all necessary to approach the location of the indoor unit. It is enough just to use the remote control with the operating range specified in the manual.
Using the remote control, you will be able to perform the following actions:
- enable or disable the split system;
- adjust the operating mode;
- adjust the temperature indicators maintained in automatic mode;
- set a timer;
- enable additional functions.
The remote control for the air conditioner is usually included in the basic kit and there is no need to purchase it separately. Application according to the information provided in the instructions. If you have any questions regarding device management, you can additionally study photo or video reviews.
Using the remote control makes the process of operating the split system even easier and more convenient. To change the mode, there is no need to be distracted from your usual activities or work - the range of the remote device is quite large. For proper operation it is necessary to monitor the battery charge level shown on the display. Also, the display can notify about malfunctions, breakdowns, since it is on it that the error code is displayed.
Galanz air conditioner error codes
Galanz air conditioner manual clearly describes all the requirements for the operation of the model. The conditions necessary for full operation, the limits of permissible temperatures are indicated here: at sharply negative temperatures (the restrictions are indicated in the induction of a particular model), the split system is not recommended for heating. The air will be heated in an enhanced mode, which will lead to an overload of the system and its failure. That is why it is so important to study the technical characteristics of the device before installation and start-up.
Among the common breakdowns requiring immediate repair of the air conditioner are:
- breakdown of the relay;
- clogging of the drainage system;
- insufficient filling of refrigerant, its shortage or excess;
- no refrigerant entering the evaporator;
- jammed compressor;
- violation in the starting board;
- breakdown of the thermostat.
It is not always that a malfunction requires repair with the delivery of the air conditioner to a service center. Often, it is enough to just get it working by replacing the filter or batteries in the remote control. The problem may lie in insufficient power supply. There may have been errors during the installation process. The main thing is to correctly determine the cause of the malfunction and eliminate it as soon as possible.
You can find out the exact cause of the breakdown and understand what exactly is wrong with the air conditioner by paying attention to the electronic inscription on the display. Most modern models have a self-diagnosis function for faults. If the device supports this function, the display will show a code. Each individual code corresponds to a specific malfunction. The code method is very handy. It allows you to avoid lengthy diagnostics with the delivery of the device to a service center, which would take a lot of time. Air conditioner error codes are a simple and quick way to inform the master about the need for a certain type of repair work. Such a modern method of diagnostics (self-diagnostics of the system) reduces time and financial costs. However, this does not mean at all that the user will be able to solve the problem on his own without the participation of a professional. If you see a specific set of characters displayed on the electronic display, you need to contact the service center.
User reviews
Before you buy a device, you can study Galanz air conditioners reviews, which reflect the opinion of buyers about the selected product. This will allow you to make the right choice in favor of the right model. Reviews are left by users who have already bought Galans climatic equipment. Marked here as benefits. So are the disadvantages of products from this manufacturer.
The advantages of goods include:
- stylish case design - split systems fit well into the interior of almost any room;
- compact dimensions;
- high-quality assembly;
- a convenient control panel that allows you to configure the parameters of the device remotely;
- ease of use;
- favorable price, making products available to a wide range of consumers;
- efficiency - low energy consumption during operation;
- low noise level;
- uncomplicated installation;
- rapid cooling of air in the room to the required values;
- long period of maintenance-free operation.
The disadvantages of users include:
- lack of additional features for budget models - the functionality is limited to a set of standard options;
- there is no instruction in Russian in the kit;
- sometimes settings fail.
Thus, we can conclude about the high popularity of Galans brand conditioners among consumers. Relatively inexpensive technology is an excellent solution in cases where unnecessary refinements are not needed and a device with a classic set of functions is quite suitable for the user. The presence of additional features is attributed to the instructions for the air conditioner in the section "technical characteristics".
