Review of refrigeration split systems Sever: reviews, instructions, comparison of models mgs 103, 211, 218

The products of the Sever company, specializing in the production of powerful split systems and other refrigeration equipment, appeared on the market more than 15 years ago. The main directions for implementation were Russia and the countries of the post-Soviet space. Recently, the company's management began negotiations with Western European refrigeration equipment manufacturers. Their main goal is the signing of cooperation agreements and further entry of the Sever trademark into the European and world markets.

Low temperature split systems North

TM "Sever" focuses on the production of low and medium temperature split systems for freezers and rooms. Depending on the method of fastening, they are all divided into floor and wall.

Low-temperature systems "Sever" is a powerful refrigeration unit. It consists of the following elements:

• Outdoor unit.
• Air cooler.
• A set of connecting pipes.

Most low-temperature models provide the ability to place important structural elements at a distance of up to 12 meters from each other. The connection is made using a 3-meter network cable.

Split system casing is made of galvanized steel sheet. For more reliable protection, it is additionally coated with a polymer coating. The tubes and fins for the heat exchanger are made of copper and aluminum, respectively. This makes it possible to significantly increase the reliability of the air conditioner and the duration of its operational life.

Most popular models also include:

1. Electronic integrated multitasking control.
2. Thermal circuit breakers that reduce the power consumption of the system.
3. Capillary system for increasing the refrigerant.
4. A monitor with which you can track power outages and phase imbalances.
5. Automatic pressure drop protection system.
6. Automatic defrosting.

Medium temperature split systems North

Such equipment is suitable for maintaining the temperature of + 5 + 10 degrees in small and medium-sized refrigerators - it is not recommended to install a split system "North" on a large refrigerating chamber. They are compact and convenient in design. These nuances allow quick access to all internal parts.

The units are quite simple to assemble and install - no additional skills are required for their implementation. They are also picky about service. It does not take much time and is an absolutely safe procedure for the master.

A feature of medium-temperature split systems is the widespread use of components and parts from leading European manufacturers. Most models use:

1. Fans from the German manufacturer "Ebmpapst".
2. Italian heat exchangers "Lu-ve".
3. Compressors from the French company "Tecumseh".

On most of the split systems, you can additionally install the so-called "winter" set of accessories. This set includes:

• Fan speed regulator, which allows you to slow down and normalize the temperature.
• Heating elements for control cabinets and compressor crankcase.
• Thermostat.
• 4-pin relay.

The installation of the above components should only be entrusted to employees of the service company or the manufacturer. Otherwise, there is a great risk of disruption of the correct operation of the cooling system or its complete failure.

Comparative characteristics of popular models

Instructions for the control panel and air conditioners North

Freezing units from the "Sever" company are controlled using a remote control. In most cases, it is not included in the basic set of split system components - it can only be purchased separately. The price of a remote control for an air conditioner today ranges from 5,000 to 9,000 rubles.

Remote controls allow for efficient operation of the freezer cooling unit. Using them helps you gain access to a large number of additional options that are not available on the main control panel.

The main features of working with the remote control can be easily found in the instructions for this device, however, without even looking into it, the following advantages of the remote control device can be distinguished:

• Blocking of the main control buttons located on the main panel. Allows you to minimize the risk of accidentally pressing them in case of emergency accessibility.
• Putting the system into sleep mode. Significantly reduces power consumption.
• Fan speed control. Changing this parameter allows you to regulate the temperature and reduce energy consumption.
• Built-in timer.
• Convenience when choosing different modes. To transfer the split system to ventilation or cooling mode, just press one button.

Error codes for air conditioners North

A properly installed air conditioner is a guarantee of normal operation of the cooling equipment for many years. As mentioned above, it should only be trusted by highly qualified professionals working in partner companies of the product manufacturer or in service companies.

If you try to configure the unit yourself, an error message will almost certainly appear on the control panel. In this case, you cannot do without repairing the air conditioner.

All possible error codes are detailed in the instructions for the device control panel and for the equipment itself. When they appear, you should adhere to the following algorithm of actions:

1. Carefully read the information about the error code in the order of its elimination in the instructions.
2. Clarify information on whether it is necessary to partially or completely dismantle the equipment to eliminate the malfunction. If this is not necessary, you can correct the error on your own. If you have any difficulties, it is better to consult with specialists from the service company.
3. Try to diagnose possible external causes of the error code. All of them are described in the instructions for the remote control and the unit itself. Perhaps it is quite possible to eliminate such reasons on your own, without the involvement of specialists and large time costs.

User reviews

Before purchasing split systems and other freezing equipment from the Sever company, it is highly advisable to carefully familiarize yourself with their main advantages, characteristics, cost and other important points. Only in this case it is possible to purchase really worthwhile equipment that will completely satisfy the client in terms of its functionality.

Based on numerous reviews on the World Wide Web about the products of the manufacturer "Sever", we can say that the list of its advantages is much larger than the list of disadvantages. So, Internet users refer to the main advantages of using equipment of this particular brand:

• Good value for money.
• An impressive product line.Today the company "Sever" manufactures more than 100 types of split systems and about 300 types of refrigeration chambers. Thanks to this nuance, you can easily choose the most suitable model for yourself.
• Acceptable level of power consumption, which is achieved through the ability to adjust the number of fan revolutions and other options.
• Compact size that allows you to place the split system even in small freezers.
• Compliance of the technical parameters of the equipment with the declared indicators.
• Good soundproofing.
• The use in the production of materials and components of a fairly high quality.
• Stable operation at maximum modes.
• An impressive operational life.
• Excellent maintainability performance.