Content
Troubleshooting
Having detected a malfunction in the operation of any units, the device displays an error code on the display. If the problem is serious, the air conditioner will usually stop working. If more than one breakdown is detected at the same time, the most serious one is displayed on the board.
Error codes of VECO air conditioners of BKL INV and BKC INV types
| VECO air conditioner error code | Decoding |
| E1 | Malfunction of the temperature sensor of the indoor module |
| E2 errors of air conditioners Veko | Malfunction of the evaporator temperature sensor |
| E3 | Compressor malfunction |
| E5 | No communication between outdoor and indoor units |
| 1E errors of air conditioners Veko | Violation of the outside air temperature sensor |
| 2E | Failure of the condenser temperature sensor |
Error codes for VECO air conditioners of types AKH, BKH, AKP, BS, BKP, AS
| VECO air conditioner error | Decoding |
| FF03 | Condenser overheating, option "cold" |
| FF04 Beko air conditioner error code | Condenser overheating, heat option |
| FF06 | Indoor unit fan function failure |
| FF07 | Failure of the room temperature sensor |
| FF08 Beko air conditioner error code | Evaporator temperature sensor malfunctioning |
| FF09 | Condenser temperature sensor malfunctioning |
Error codes for VECO air conditioners of types BKN and AKN
| Beko air conditioner error | RANNING indicator | SLEEPING indicator | TIMER indicator |
| Failure of function of the temperature sensor of the solenoid type inside | Blinking | Blinking | Blinking |
| Failure of the room temperature sensor function | Blinking | Blinking | Shines without interruption |
| Failure of function of the temperature sensor of solenoid type outside | Blinking | Blinking | Disabled |
| Indoor unit fan motor function failure | blinks | Shines without interruption | Blinking |
Any of the above air conditioner errors Beko is the reason for the immediate shutdown of the device.
- The secondary activation of the compressor is delayed by 3 minutes;
- If the compressor top temperature is more than 115 degrees, it stops working. The normal operating temperature is one hundred degrees;
- If the voltage level in the network is less than 175 or more than 260 volts, the equipment is turned off;
- If the inverter overheats, too much current or high voltage is supplied to it, the system will shut it down;
- If the electrical wires are disconnected in any of the units, the air conditioner stops;
- If the fan works weaker or more intensively than the norm (the norm is 300 - 400 rpm), the air conditioner is turned off;
- If within four minutes the system does not receive messages about crossing the "0", it is switched off.
