Do-it-yourself firebox for a bath made of wood

A sauna heated by a traditional stove requires a lot of logs to be stored. For storage and protection from adverse conditions, wood logs for the bath are erected. Instructions for self-construction will allow you to take into account all the nuances.

Features of wood burning stoves

A spacious stationary firebox can be made from scrap materials

Do-it-yourself fire boxes for a bath made of wood are built with lattice walls like blinds. In this case, precipitation with an oblique wind will not get inside, and water will flow down the visor. But even in a hammered structure with small intervals, the logs dry well.

It is necessary to ensure dryness inside the structure, so the top of the woodshed is closed and the floor is isolated from the ground. The structure is installed at a height of 20 cm. If this rule is not followed, this will lead to rapid decay of the fuel.

During construction, ventilation must be considered. To do this, during storage, you need to leave gaps between the firewood. The blocks are prepared in advance and left to dry.

It is recommended to cook the logs in winter, because when splitting, you need to make a minimum of effort.

Types of structures

Portable model of a wood-burning stove for a bath or fireplace

You can build a raspberry on your own, buy a finished product in a store, or order a forged model in a workshop. But before making a purchase, you must choose an option based on the purpose:

  1. The portable model accommodates a small number of chumps. Their compact size is effortless to carry.
  2. Street structures are built as separate buildings or annexes. They are usually placed in the garden near the sauna.
  3. The annexes to the bathhouse are built near the wall and are made in the same style as the house.

Traditionally, the sauna is heated and heated using a stone or metal stove. Therefore, firewood is harvested in advance, and proper storage determines the quality of the kindling.

Types of woodburners

There are many options for placing a firewood near the bathhouse. In this case, the owner can make changes to the basic elements at his own discretion based on ease of use.

The table shows the main types of storages and their features:

Woodburner typeNuances of construction
AttachedThe drain is installed so that moisture does not seep into the main structure. It is necessary to install high-quality protection against wood pests.
Under the same roof as the houseIt is carried out in the same style as the main building. Special attention is paid to fire safety.
AutonomousIt is necessary to isolate the building from the ground, setting a gap of at least 10 cm. The walls are made loose, leaving room for air exchange. It is possible to store brooms.
MobileThe compact size of the model allows you to carry the logs in your hands, but no more than 2 fireboxes. The storage facility is not able to protect firewood from precipitation.
Serial product with accessoriesFinished products can be purchased from 15,000 to 5,000 rubles. The model is equipped with compartments for logs, poker and scoop. The thing complements the design of the room.

Each of the options has advantages and disadvantages. However, in some situations, minus can be an advantage. The owner of the bath decides which design of the woodshed to choose, based on financial capabilities and taste preferences.

DIY firewood manufacturing technology

Before proceeding with the construction of a woodshed for the bath, it is necessary to choose the location of the structure. As a rule, a site is allocated near the entrance. Then a project for the future construction is created. If you plan to keep tools in a woodpile, this is already considered a barn. The size is calculated depending on the heating area. 100 m². you will need 2.1 m³ of dry pine logs or 1.7 m³ of birch.

Materials and tools

Outdoor woodshed with slate roof

Street models are made of wood, but such products are often found in the interior. In addition, this material is environmentally friendly. If you want to add uniqueness, you can order leather wood burning stoves.

To make a wooden woodpile yourself, you will need a drill, a hacksaw and a hammer. Models placed above the ground require the arrangement of poles installed in pre-prepared pits. Additionally, you will need a plumb line, twine and a stepladder.

Construction of a stationary woodshed

A stationary structure requires an arrangement of the foundation, since when erecting posts on the ground, the structure will be unreliable. To do this, dig holes to the depth of freezing of the soil, install supports and fill with concrete. Construction can begin after 2-3 days.

Frame log firebox

Do-it-yourself technology for erecting a stationary firebox for a bath:

  1. After the pillars have been erected in the amount of 4 pieces, proceed to the frame. This will require a bar of 150x200 mm. Sew the outline using metal corners and long self-tapping screws. Pre-treat the surface of the material with fire and bio-protection. Additionally, lay a layer of waterproofing from pieces of roofing material that are double complex.
  2. Using the corners, install the vertical frame - start with the C-pillars, then fit the middle and front elements. Secure with temporary jibs.
  3. Make the top harness and nail the roof rafters.
  4. Install two support beams in the place of the future door opening. Subsequently, a canvas is hung on them. Provide a locking mechanism if the situation in the village is unfavorable.
  5. The next stage is the planking of the horizontal frame. In this case, you do not need to fit the fragments back to back. Leave small openings for air exchange.
  6. Make the roof of the structure a single-pitched one of iron or corrugated board. As materials for the roof, you can use any within the allocated budget.

Create a canopy above the entrance to the annex. The logs will not get water during precipitation.

To form the walls of the woodpile of the bath, you can use bars with a step of 25-30 mm. Treat wooden elements with an antiseptic solution and anti-flammable impregnation. Finally, open the building with polyurethane-based paint or varnish.

Manufacturing of a wall-mounted version

A wall-mounted firewood should be placed on the north side of the house.

To build a wall-mounted firebox in a bathhouse with your own hands, you need to choose the north side of the house or an outbuilding. This is due to the fact that logs are not recommended to be kept in the sun. It is important to ensure proper drying with natural ventilation.

When building this option, keep in mind that water can flow into the room. A visor will help to avoid the formation of moisture. For the rest, the arrangement of the firewood, attached to the bath, does not differ from the stationary model. The only design feature is placement behind the house or sauna.

Features of arranging a portable firebox

Portable models are usually purchased in stores or made from scrap materials. Wicker and forged models are placed in the dressing room, using as a stand. It is noteworthy that vine products require careful handling.

To make a woodpile from metal, you need skills in working with a welding machine. As blanks, you will need 4 rounds of 35 cm each and 2 pcs. 170 cm each. Bend the long ones in the shape of a horseshoe - this is the base into which the logs will be laid. Connect the elements with short sections.Round logs of 35 cm will be used to make legs. When working with a welding machine, protect your face with a special mask.

ihousetop.decorexpro.com/en/
Add a comment

Foundation

Ventilation

Heating