Variety of types of heating stoves Siberia

The wood-burning stove Siberia is an effective option for heating a utility room, summer cottage, warehouse, garage or small house. The user independently regulates the duration of combustion and the temperature using a gate or regulator on the leaf. A feature of the devices is the complete combustion of fuel with a minimum ash residue.

Varieties of stoves Siberia

The stove from the NMK plant of the Siberia series is made with a one-piece steel body. The entire line of heating devices differs in power and is classified depending on the scope of application.

Bath equipment

The range includes 7 devices made of 6 mm steel. The back wall is reinforced up to 12 mm. The systems for afterburning pyrolysis gas and clean glass have been implemented. In addition to firewood, brown coal can be placed in the Siberia sauna stove. Bath equipment is represented by modifications:

• Under the hinged tank. They are manufactured with a chimney with a diameter of 400 mm, a depth of 750 mm, a width of 470 mm and a height of 780 mm. The maximum weight of stones is 60 kg. The heat exchanger can be installed at the bottom of the housing. The heater takes up a lot of space, but is limited by the inclined part of the collector. There are special grooves for the quality of air circulation. The soot is easily removed due to the special design of the collector.
• With built-in metal reservoir. The 50 l water tank is welded to the main body. A bath stove of the Siberia series is produced with a firebox with a depth of 400 mm and a chimney displaced forward. The depth of the product itself is 1025 mm, width - 470 mm, height - 780 mm. The device is suitable if you have a steam room or sauna with a volume of 10 to 20 cubic meters.
• With a closed heater. The closed type of the heater ensures the comfort of being in the steam rooms due to the uniform multi-level heating of the stones. The models are manufactured with a 450 mm firebox, 115 mm diameter chimney, 817 mm deep, 595 mm wide and 1082 mm high. They differ in the power of the steam generator, the presence of a remote fuel channel, and the provision of a stable temperature regime in the steam room.

The versions for the hanging tank and with closed heaters are compatible with gas burners.

Devices for space heating

The stove-fireplace Siberia is installed in a dacha, in a country or private house. You can put firewood or special fuel briquettes into it. The manufacturer has equipped the devices with a gas afterburning system, due to which heat loss is reduced and the room heating rate increases.

The series is represented by 4 models designed for heating rooms with a volume of 120-375 cubic meters. Their technical parameters can be viewed in the form of a table.

The features of Siberia brand fireplace stoves include:

• built-in panoramic glass with an air curtain system to protect against soot and high temperatures;
• ergonomics - firewood is compactly placed inside the firebox;
• long burning without losses.

Afterburning of secondary gases increases the efficiency of fireplaces.

Solid fuel models

The BV series is represented by all-metal equipment with a natural convection system.The units are made of professional pipes in contact with the combustion chamber. They heat streams of air from 60 to 150 degrees. The air heater is equipped with two combustion chambers. At the bottom there is gasification, at the top - afterburning of gases with the help of injection ignitors. Burelyan models differ:

• the presence of two regulators - power (on the sash), gasification (on the chimney);
• the possibility of heating rooms with a volume of 100 to 600 cubic meters;
• compatibility only with solid fuels - wood, sawdust, cardboard, briquettes;
• high efficiency - they work from 8 to 12 hours on one tab of fuel;
• versatility - it is allowed to use it in a garage, workshop, in the country or in a private house.

The steel body is covered with a heat-resistant agent, which polymerizes during the first heating. The paint gives off a pungent odor.

Specifications

The parameters of the volume of rooms, power, weight, depth of the combustion chamber, dimensions of the product and the diameter of the chimney are prescribed in the passport of the device. They differ depending on the series. When buying a stove, the letter characteristic is also important:

• L - alloy steel was used for the production of the combustion chamber /
• K - a device with a convector mixed casing (stainless parts and assemblies with a heat-resistant enamel coating) /
• NZ - mirror stainless steel was used for the convector casing /
• P - model with a steam generator.

By the name "Profi" one can judge about the execution of a body made of steel with a thickness of 4 mm with 71% of chromium particles. The name "Panorama" indicates the presence of a sash with heat-resistant glazing.

Benefits and cons

The manufacturer uses heat-resistant steel alloyed with chromium, which, in terms of tightness characteristics, heating quality and linear expansion parameters, can replace cast iron material. The line of furnace equipment Siberia has several advantages:

• strength of the body and other elements due to bolted, welded joints and sealing with a heat-resistant cord;
• heat capacity of the material and heat resistance of the furnace even at high weight and temperature loads;
• aesthetic appearance - with massiveness, the units maintain a balance of shape and cladding;
• the possibility of using brown coal and peat briquettes as additional fuel;
• versatility - used for heating premises, installed in workshops, garages, saunas and baths;
• capacity and increased length of the firebox, where it is allowed to lay chopped logs;
• wide range of models - the heater can maintain a comfortable temperature in rooms with a volume of 40-720 m3.

Of the disadvantages of heating equipment, users highlight the high cost and the ability to install gas burners only in models with an extended remote firebox.

The principle of operation of ovens Siberia

The complete operating manual contains information on the installation and operation of the ovens. The all-welded product has a simple and reliable design. A continuous row of heat exchanger pipes on the side parts increases the heat transfer of the device.

Cold air masses flow by the principle of natural convection into the openings of the lower heat exchangers. The return is carried out through the upper elements - the air heats up to 60-80 degrees. Warm streams are evenly distributed throughout the room, mixed with cold ones.

In a two-chamber furnace, firewood is burned and the released gas is afterburned. The pyrolysis masses that appeared after smoldering firewood in the first firebox (bottom) are fed into the secondary firebox (top). There the gases are burned out using injectors.

The main combustion mode due to the gradual smoldering of solid fuel lasts from 8 to 10 hours continuously. The chamber dividing wall allows a uniform temperature to be achieved even at the ends of the heat exchangers.

Fuel is loaded through a flap, which is tightly closed by an eccentric lock. There is a blower regulator on the door - the user independently controls the burning rate. The transition to the afterburning mode is carried out by adjusting the damper on the chimney. An ash pan is used to protect against the loss of charcoal.

Fill the combustion chamber with long round logs.

A brief overview of the main models of stoves Siberia

The manufacturer's lineup includes many devices for a bath or living room.

Siberia 7

Cast iron fireplace stove with heat-resistant shutter. The bump stop is cast iron, and at the same time serves as a splitter. There are upper and lower dampers for temperature control. The firebox is double, the device is equipped with afterburning and clean glass systems.

Features:

• power 7 kW;
• heats a room with a volume of 125 cubes;
• runs on fuel and briquettes;
• door with heat-resistant glass;
• the firebox is 200 mm deep.

The wall thickness of the fireplace is 10 mm.

Siberia 12

Model in a steel case with a metal convection casing. The inner surface of the firebox is decorated with fireclay tiles. The intensity of air supply to the combustion chamber is regulated. The fireplace option is equipped with a heat-resistant glass screen.

Features:

• power 12 kW;
• designed for heating rooms with a volume of 200-300 cubic meters;
• furnace compartment with a depth of 400 mm;
• chimney with a diameter of 150 mm brought up;
• the width of the unit is 645 mm, the depth is 540 mm, and the height is 1195 mm.

The ashpit of the Siberia 12 furnace in the form of a box is located behind the furnace flap.

Katun

Sauna stove that heats the steam room and the adjacent room 12-24 cubic meters. For the manufacture of the furnace and the body, 5 mm thick steel was used. The firebox is equipped with heat-resistant glass. A system for afterburning secondary gases has been implemented.

Features:

• the fuel material is not only firewood, but also brown coal;
• 200 kg of stone is placed in the grid;
• the maximum length of logs along the depth of the firebox is 400 mm;
• remote type combustion channel.

The water tank can be placed on the pipe.

Penny

Budget sauna model for steam rooms for 15 cubic meters. Suitable for baths with a joint sink and steam room. Compatible with a 31 liter tank, 60 kg stones are heated in 30 minutes to generate steam.

Features:

• the possibility of installation in steam rooms from 6 cubic meters;
• a firebox with a depth of 400 mm is only compatible with wood;
• open heater;
• the sash is solid, without glazing;
• chimney with a diameter of 115 mm brought up.

Due to the design, the stove can be heated from the steam room.

Siberia BV-480

Air heating unit of 8 rectangular metal pipes. It is used for heating houses, workshops and workshops with a volume of 180 to 480 m3. Equipped with a gas afterburner system. Large logs can be put in the stove, the firebox door is closed with an eccentric lock.

Features:

• the intensity of fuel combustion is regulated;
• one bookmark of firewood is enough for 8-10 hours;
• device power - 18 kW;
• firebox with a depth of 590 mm with a maximum load of 95 liters;
• section of pipes for the body 80x40.

The appliance quickly heats up the air and distributes it evenly throughout the room.

The line of heating devices Siberia is characterized by reliability, intensity of heat transfer and fast heating. The stoves are mounted on a prepared foundation. Models with a gas burner must be connected only after obtaining permission.