TOP-5 solid fuel boilers for heating

There is a huge selection of heating boilers on the market, differing in price, heating means and area of ​​heated rooms. Below is an overview and comparative characteristics of the most popular solid fuel boilers.

Lemax Forward-16 17 kW

This boiler model is used for heating residential premises, cottages, as well as office buildings, in which water heating with forced or natural circulation.

The heat exchanger in the Lemax Forward-16 boiler is made of high-quality steel, the thickness of which is 4 mm, and the heat-resistant grates are made of high quality gray cast iron. Thanks to this, a long service life of the device is achieved and the ability to withstand temperature changes.

Corrosion protection is carried out by means of a heat-resistant coating of the heat exchanger and treatment of internal voids with an inhibiting compound.

Maximum power - 17 kW

Heated area - 170 m2

Fuel type - wood, coal, coke

Management - mechanical

[webnavoz_wrap]

[webnavoz_plus]

  • economical fuel consumption;
  • environmental friendliness;
  • low noise level;
  • loading firewood in a vertical way;
  • ease of use.

[/ webnavoz_plus]

[webnavoz_minus]

  • non-standard chimney diameter (140 mm).

[/ webnavoz_minus]

[/ webnavoz_wrap]



Teplodar Kupper Practitioner 8

This model is well suited for garages or country houses, as it is intended for heating small (up to 80 m2) rooms.

The versatility of the boiler allows it to be installed not only in closed, but also in open heating systems, where there is forced circulation.

A feature of this boiler model is the ability to connect external control, as well as the presence of a thermometer to control the level of water heating. In addition, the firebox in the boiler is deep enough and is located at an angle, which allows using long firewood in the heating process.

The only difference of the Kupper Praktik-8 model from other modifications of this line is the absence of the possibility of replacing the built-in heating element with a capacity of 6 kW with a more powerful one.

Characteristics:

  • Power - 8 kW;
  • area of ​​premises - 40-80 m2;
  • Fuel - coal, peat briquettes, firewood;
  • Management - mechanical

[webnavoz_wrap]

[webnavoz_plus]

  • affordable price;
  • compactness;
  • ease of management.

[/ webnavoz_plus]

[webnavoz_minus]

  • not suitable for two-story houses;
  • the possibility of heating the case.

[/ webnavoz_minus]

[/ webnavoz_wrap]



Teplodar Kupper Expert-15

Solid fuel boiler Kupper Expert 15 is a long-burning boiler. This model can be used to heat rooms with an area not exceeding 150 square meters. Firewood, coal, briquettes are used as fuel. The built-in 6 kW heating element unit can maintain the achieved heat level. The duration of combustion is achieved due to the upper combustion of the fuel in the boiler due to the three-zone air supply, as well as a sufficiently developed heat exchanger. Kupper Expert 15 can work in 4 modes: fast warm-up, classic, medium and maximum.

Characteristics:

  • power - 15 kW;
  • room area - 100-150 m2;
  • type of fuel - coal, firewood, electricity.

[webnavoz_wrap]

[webnavoz_plus]

  • compactness;
  • light weight;
  • low cost;
  • made of quality materials;
  • the firebox for laying firewood is spacious;
  • heats the room well.

[/ webnavoz_plus]

[webnavoz_minus]

  • fast burning of firewood;
  • the need to add fuel before bedtime.

[/ webnavoz_minus]

[/ webnavoz_wrap]



ZOTA Topol-16VK 16 kW

A feature of this model of a solid fuel boiler is the duration of fuel combustion (one load provides a combustion cycle for 10-12 hours),as well as the presence of two sections for laying firewood or coal in the vertical and horizontal planes.

Difference of the Topol-VK series from the previous Topol-M in water-filled grates and changes in the design of the heat exchanger.

Characteristics:

  • power - 16 kW;
  • room area - 160 m2;
  • fuel - firewood, coal, briquettes (wood and coal);
  • control - there is no control panel.

[webnavoz_wrap]

[webnavoz_plus]

  • fast heating;
  • burning time;
  • uniform heat release;
  • ease of management;
  • made of quality materials.

[/ webnavoz_plus]

[webnavoz_minus]

  • lack of a control panel;
  • heavy weight;
  • high cost

[/ webnavoz_minus]

[/ webnavoz_wrap]



EVAN WARMOS TT-25K 25 kW

The Evan boiler is unpretentious to the type of fuel used - the presence of a grate system can burn even wood waste, in which the humidity reaches 70%. The efficiency is calculated just for the Russian winter, and not for the European one.

The depth of the loading chamber is 55 cm, which allows the use of sufficiently long firewood. In the presented model, the combustion period of the loaded fuel is increased, provided that the chamber is completely blocked. When using coal as fuel, the maximum burning time will be up to 15 hours, and when using firewood - up to 8 hours.

A feature of the model is the presence of a thermomanometer, which allows you to control temperature and pressure, as well as the presence of a protective screen that protects against flames. The installed draft regulator allows automatic control of air access to the combustion chamber, and the built-in heating element for 2 kW with a thermostat and thermal limiter allows maintaining the achieved water temperature.

Characteristics:

  • power - 25 kW;
  • the area of ​​the room is 180 square meters;
  • control - mechanical;
  • fuel - peat, coal, firewood.

[webnavoz_wrap]

[webnavoz_plus]

  • suitable for any type of fuel;
  • comfortable combustion chamber with a metal thickness of 4 mm;
  • firebox capacity 50 l;
  • the maximum length of firewood is 55 cm;
  • the fuel burns out without residue due to the round shape of the boiler.

[/ webnavoz_plus]

[webnavoz_minus]

  • high price;
  • great weight.

[/ webnavoz_minus]

[/ webnavoz_wrap]



ihousetop.decorexpro.com/en/
Add a comment

Foundation

Ventilation

Heating