When choosing a radiator, you should pay attention to the material of the sections, since it is this material that affects the heat transfer of the future battery, its weight and durability. The most commonly used are steel, cast iron, aluminum and their alloys. For the correct selection of the battery, it is necessary to take into account the type of heating system (centralized or autonomous), heat transfer, as well as the area of the heated room.
Water heating radiators differ in materials of manufacture and design:
panel (they consist of two sheets and form a box);
Another radiator made of an alloy of two metals from the Royal Thermo company. Each section has a sturdy metal collector made of 20 grade steel. It has a unique design that allows to increase the heat transfer of the radiator by 5%. One section of such a radiator achieves a heat transfer rate of 189 W at a temperature of 70 degrees. The radiator gaskets are made from modern components using cotton and silicone, which allows them not to lose their elastic properties over time. The special design avoids the problem of rust formation. The maximum power is 1134 W, which allows a room of 20 sq. M. raise the temperature by 4 degrees in 3.5 hours. Perfect for installation both in apartment buildings and in country cottages.
[webnavoz_wrap]
[webnavoz_plus]
steel grade 20, which provides increased strength characteristics of the radiator;
the presence of silicone gaskets between the sections, eliminating leaks;
special design of the radiator, which avoids corrosion problems.
[/ webnavoz_plus]
[webnavoz_minus]
high price;
poor quality paintwork;
increased sound conductivity.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Royal Thermo BiLiner 500 x6
Wall mounted radiator with six sections and side connection. Made of bimetallic alloy. It has a heat dissipation of 666 W and is capable of heating up to 110 ° C. Like any other bimetallic radiator, it has a long service life (up to 25 years). It is presented in three colors: black, white, gray. Resistant to water hammer, not subject to corrosion, environmentally friendly, and also unique in shape and design. Ideal for installation in apartments.
[webnavoz_wrap]
[webnavoz_plus]
Low cost;
Easy installation and ease of daily maintenance;
High indicators of resistance to external threats.
[/ webnavoz_plus]
[webnavoz_minus]
Insufficient level of paintwork quality;
The delivery set does not include fasteners;
A fairly high level of rejects in finished products.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Rifar Monolit 500
The Monolit bimetallic radiator is one of the new products of the Rifar company. The manufacturer claims that the service life of such a heating element is 25 years. The channels of the battery are made of steel with increased resistance to corrosion, and their thickness is absolutely equal to the thickness of ordinary steel water pipes. Also, in this equipment there are no joints between the sections, and the maximum operating temperature reaches 135 degrees. Monolit 500 radiators are designed for bottom connection to the heating system and are used to organize heating systems with radial wiring or to improve classic heating schemes. Also, one of the main advantages of a radiator is indifference to the type of coolant and the quality of its preparation. The RIFAR company establishes a warranty period for radiators of the MONOLIT model for 25 years, subject to the conditions of installation and operation.
[webnavoz_wrap]
[webnavoz_plus]
long service life;
increased level of rust resistance;
easy installation thanks to standard screw connections.
[/ webnavoz_plus]
[webnavoz_minus]
high marriage rate;
sharp aluminum outflows are possible;
poor welded joints due to which leaks are possible.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Global STYLE PLUS500 x6
It is the only Global bimetallic radiator with a depth of 95 mm, which allows demonstrating higher heat transfer rates. Due to the steel design, it has a significant margin of safety and long-term operation. Able to work in centralized and autonomous heating systems with a working pressure of up to 35 atm. inclusive. These radiators are made in Italy and are delivered in cardboard boxes wrapped in foil. The inner surface of the battery is made of steel and provides enhanced hydrogen resistance characteristics. The radiator is compact and does not take up much space; it protrudes only 12 cm from the wall.
[webnavoz_wrap]
[webnavoz_plus]
high heat transfer;
foreign production;
compact minimalistic design.
[/ webnavoz_plus]
[webnavoz_minus]
very high cost;
lack of fasteners included.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Rifar Base 500 × 6
RIFAR Base 500 is made of bimetallic alloy. Center distance 500 mm. Designed for use in hot water heating systems for residential and office buildings. The battery section is made of steel pipe, which is cast under high pressure with an aluminum alloy. This technology makes it possible to provide the product with high strength and performance characteristics. The radiator can be used in both steam and water heating systems, and the maximum operating temperature reaches 110 degrees. The special design of the core allows you to deliver 1224 watts of heat. Ideal for installation in heating systems of an apartment building.
[webnavoz_wrap]
[webnavoz_plus]
possibility of operation in steam and water heating systems;
maximum temperature - 110 degrees;
the use of two metals in the construction.
[/ webnavoz_plus]
[webnavoz_minus]
marriage occurs;
high price.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Kermi FKO 22 500
Kermi FKO 22 500 is a two-row radiator and consists of two ribbed profiled panels. Heat dissipation is ensured by the operation of two convectors, which increase the efficiency of the device. Made of high quality 1.25mm cold rolled steel. It can be performed both in floor and wall formats. Differs in a high service life, resistance to high pressure and external influences. The surface of the radiator has a lining, and a special three-layer painting technology has made it possible to increase its service life. Pressure control in Kermi FKO 22 500 is carried out by a valve in automatic mode by reducing the pressure level at the required heating. The Kermi steel radiator is ideal for autonomous heating systems.
[webnavoz_wrap]
[webnavoz_plus]
availability of floor and wall formats;
good paintwork;
automatic pressure control system.
[/ webnavoz_plus]
[webnavoz_minus]
only for closed heating systems;
the maximum working pressure of the coolant is no more than 10 atmospheres.
[/ webnavoz_minus]
[/ webnavoz_wrap]
Royal Thermo PianoForte Tower
The bimetallic Royal Thermo PianoForte Tower has a unique design that fits perfectly into the interior of any home. This model can be executed with 18 and 22 sections. It has a high level of heat transfer due to a large number of sections, front convection holes and additional ribbing. The Royal Thermo PianoForte Tower is available on the market in three colors: black, white and silver. The special Oxsilan 9807 coating, which is applied to the radiator section prior to painting, provides improved rust resistance and a longer service life. The painting process uses environmentally friendly AkzoNobel and FreiLacke nano-paints.
