A gas or electric Ferroli boiler is one of the best options for an autonomous heating device. The equipment is equipped with an electronic control system, but is available for maintenance and operation. A variety of models of household heating equipment, reliability and efficiency are the main advantages of the products of the Italian brand.
Ferroli - the history of an Italian company
The Ferroli company, one of the ten world leaders in the production of heating and climate control equipment, was founded in 1955 in the city of San Bonifacio. The gas-fired boilers, made by the Ferroli brothers, quickly gained popularity among Italians. After 3 years, the products were ordered for the municipal houses of Verona. Following the Italian market, the company's steel and cast iron boilers established themselves in other European countries.
In the 90s, an innovative investment program began. New factories are built, subsidiaries are opened in China. The brand unites several companies under the common Ferroli Group brand. It works in 5 areas of production, but 86% of production is for heating equipment.
Ferroli boilers technical characteristics
Heating appliances of the Italian brand are designed for private houses, apartments or industrial premises. It differs in installation method and technical parameters.
According to the installation method, the units are of two types:
- Wall-mounted - a universal option for a house, apartment or summer cottage. The products are presented in many modifications. The Ferroli wall-mounted boiler is equipped with a steel combustion chamber with an anti-corrosion coating.
- Floor standing - powerful dimensional boilers, recommended for private houses and low-rise buildings. They are reliable, durable and affordable.
Number of circuits:
- Single-circuit equipment is designed to heat the coolant in the heating system.
- A double-circuit wall-mounted gas boiler Ferroli performs two functions: heating and water heating. Among the suspended modifications, there is only one model with a single-circuit design. The units have a built-in boiler with a volume of 50-150 liters.
Combustion chamber type:
- Open type - models are marked with the letter "C". The system draws air from the room, requires the installation of a chimney.
- Closed type - the chamber is operated by a fan blowing air from the street. It is designated by the letter "F".
Plate type heat exchangers are traditionally installed in boilers. Less commonly, there is a node of three tubes with coils. The material for the floor structures is heavy and durable cast iron. Heat exchangers for wall models are made of steel or copper.
A variety of equipment modifications allows you to choose an option that operates on available fuel: natural or compressed gas, electricity, coal or wood, diesel.
All equipment received a reliable emergency protection system:
- preventing pump blockage;
- smoke removal sensor;
- anti-freeze system;
- self-diagnosis function;
- bypass from water pressure drops;
- overheat protection.
The average power of household boilers is 10-45 kW. Industrial equipment is capable of providing about 150 kW. The plant efficiency is 92-109%.
Variety of heating technology Ferroli
The brand's catalog contains equipment operating on various types of fuel.
Gas
Ferroli wall and floor gas boilers comply with European quality and safety standards. The main units of the units are made of corrosion-resistant materials. Burner and pump control is automated. You can adjust the processes on the panel screen or from the remote control. Most models have two circuits, which allows you to prepare hot water for domestic needs. The units are presented in a wide power range. They are designed for small apartments and spacious buildings.
The most economical option for heating equipment is a condensing boiler. Its efficiency is 107-109%. The technique helps to save energy resources and pollutes the environment less. Despite the many advantages of the technique, it cannot be used in all regions of Russia. This is due to the rules for the operation of boilers. The difference between indoor and outdoor temperature must not exceed 20 ° C. Also, the disadvantages of the models include the high cost.
Solid fuel
Non-volatile equipment is manufactured for domestic and industrial use. It is equipped with mechanical adjustments. Most of the models are produced with a cast iron combustion chamber. The fuel is coal, firewood, and when installing a special burner - pellets. The most popular is the SFL series. When using it, installation of a direct insulated chimney is required.
Universal
A multi-fuel boiler supplied by Ferolli is called a multi-fuel boiler. Equipment with an inflatable burner operates on gas / diesel. These are products of the ATLAS series. When using it, modifications with weather-dependent control are recommended. Solid fuel / fuel oil boilers of the GF N series have a body protected from heat loss by a layer of insulation. The coolant temperature in the circuit is at least 60 ° C.
Electrical
Ferroli electric boilers heat water using a heating element. Equipment power from 6 to 24 kW. The boilers are compact in design. The control is carried out using the display. There is a possibility of programming a weekly cycle. Models of the LED series can be combined with underfloor heating, an external hot water boiler. The units are connected to a 220 V network.
Advantages and disadvantages of equipment
The products of the European manufacturer have become popular due to their adaptation to the climatic conditions of Russia.
Advantages:
- Efficient work, high level of efficiency - 92-99.5%.
- Equipment management is simple and straightforward.
- A wide range of Ferroli products allows you to choose a boiler that meets the individual requirements of the heating system.
- The safety of equipment operation is ensured by numerous protection systems and sensors.
- The use of special materials makes the operation of the boilers quiet.
- Affordable cost of heating equipment.
All products of the Italian brand have received a stylish modern design. It fits harmoniously into the interior of the room.
Disadvantages:
- The electronic board of the equipment is sensitive to voltage fluctuations; it breaks down during sudden surges.
- The heat exchanger becomes clogged with deposits during operation and requires cleaning.
- Volatility - electricity is needed to ignite the burner.
To avoid problems in operation, it is better to entrust the connection, maintenance and repair of boilers to the specialists of the service center.
Installation and operation of boilers Ferroli
Heating equipment is installed in a room that meets safety requirements. It must have a ventilation system and an emergency exit. A shut-off valve is installed between the boiler and the heating system, allowing it to be cut off from the system in the event of a breakdown. After fixing the unit in the selected place, a serial connection of the communication systems takes place:
- gas duct connection;
- heating water connection;
- connection to the gas main with the installation of a gas valve and meter;
- connection to the mains with the boiler grounding;
- installation of a thermostat.
Thermal equipment operation is controlled from the LCD panel. As a preventive measure for the operability of Ferroli boilers, according to the instructions, the channels are periodically cleaned. The sequence of work and the permitted chemical compositions are indicated in the manufacturer's instructions.
Possible boiler malfunctions
Equipment parts wear out during operation. Constant contact with poor quality water leads to corrosion and deposits. The circulation pump may fail, a leak occurs in the heat exchanger, or water stops circulating through it. Due to voltage surges, damage to the control board is possible. Boiler electronics are sensitive to the parameters of the electrical network. Install a voltage stabilizer to prevent damage.
Error codes
The errors shown on the boiler display are divided into 2 groups:
- Non-critical F, causing a temporary failure of the settings, which can be eliminated after bringing the parameters back to normal.
- Critical A - malfunctions causing boiler shutdown.
The most common error codes are:
- A 01 - no burner flame and no ignition. You will need to check the gas flow, the installed power, the pressure in the nozzle. When air accumulates in the system, it is released through the taps.
- A 03 - overheating protection tripping. It is necessary to diagnose the pump and sensor. The fluid in the pipeline is checked, excess air is vented.
- F 04 - activation of the smoke exhaust indicator. Cleaning of the chimney shaft is required. Possible sensor breakage. The boiler is restarted.
- F 05 - incorrect fan connection. Inspect the wiring, tighten the contacts.
- F 37 - pressure drop in the system. Occurs due to leaks. It is necessary to check the boiler and the tightness of all connections.
- F 40 - pressure above normal. Clean or replace the relief valve.
Most errors result in hardware blocking. To turn it on, in some cases, it is enough to remove the plug from the outlet and then reconnect it to the power supply. The appearance of any malfunctions is a reason for contacting the service department. But minor repairs and cleaning of the burner or chimney can be done by yourself.
To restore the performance of the equipment after eliminating the error, you must press the "Reset" key. The system will reboot within 30 seconds.
Popular models
The range of products changes regularly, progressive modifications appear to replace outdated models. The popular models in the review should be divided into two groups: wall-mounted and floor-standing.
Wall mounted:
- The Divabel series are wall-mounted double-circuit boilers, presented in models with a capacity of 10 to 24 kW. They are produced with a closed combustion chamber, equipped with a Wilo pump. The advantages include quiet operation and the presence of a room thermostat. The product is considered the most reliable in the line of wall modifications.
- Diva series - wall-mounted units with injection burner and electronic ignition system. They have a high power of 24-40 kW. The use of a primary copper heat exchanger with anti-corrosion coating extends the life of the equipment. Main gas or liquefied gas is used as fuel.An additional stainless steel heat exchanger is integrated for DHW. A remote control can be connected to control the electronic board.
- Fortuna series - a wide model range is represented by boilers with a capacity of 10-40 kW. The line includes models with open and closed combustion chambers. Two circuits allow you to heat the room and provide it with hot water. The control panel LCD is backlit and intuitive to operate. The boilers received a self-diagnosis function, protection against freezing and overheating. They support an economical summer regime. Fortuna H models are single circuit. They are equipped with an expansion tank and a circulation pump. There are 3 preset operating modes.
Floor standing:
- The Pegasus D series is a classic cast iron boiler with an atmospheric stainless steel burner. The Romeo remote control can be used to control the temperature. After installing the outdoor thermostat, weather-dependent automation is available.
- Atlas series - combined boilers designed for gas and diesel. Single-circuit models with a closed combustion chamber are made of steel and have two-layer thermal insulation. The boilers operate silently; when changing fuel, a suitable burner must be installed. Atlas modifications are available with analog control, and Atlas Evo with digital control.
- The Pegasus 56 series is a high power household appliance with a classic design. Water and antifreeze can be used as a heat carrier. The control panel is push-button. The model is single-circuit, its efficiency is 90.5%. Connection of an external DHW tank is possible.
Ferroli heating equipment will help create a comfortable temperature in the house and solve the problem of providing hot water. Boiler models are presented in a budget and medium price category.
