DIY natural ventilation at home is mounted in such a way that air is constantly exchanged in all rooms. It is essential for a healthy living environment and utility rooms. Installation natural ventilation at home with your own hands increases the convenience of being in the house and prevents mold and mildew from damaging walls, carpets and furniture. Modern technologies make it possible to build practically airtight houses, which must certainly be equipped with ventilation.
Subtleties of the equipment of natural ventilation of a wooden house
If the building is one-story, then it is quite simple to equip the ventilation of a wooden house with your own hands. The system for two- or three-story houses is more complex, but even a good owner can handle such work. The success of natural ventilation directly depends on the difference in temperature and pressure outside and indoors.
That is, the system will work better in the cool season. The advantage of natural ventilation in the absence of operating costs and quiet operation.
Modern houses are being commissioned with already functioning ventilation systems. Therefore, do-it-yourself ventilation in the house is often necessary to equip in old buildings. It is most convenient to lay ventilation ducts directly in the wall partitions. They are completely invisible and do not violate the design of the premises. But this is possible only if the owner mounts the ventilation of a wooden house with his own hands in the process of erecting walls. The main principle of the effective operation of the ventilation system of a wooden house is that the chimney should exit vertically through the roof and the higher it is, the better the draft will be. That is, the air exchange will be more intensive.
When installing the ventilation of a private house with your own hands, it is important to choose the right pipes for the air ducts: they should be with smooth inner walls, the pipes should be of the same cross section.
The equipment of brick ventilation ducts is a laborious and unnecessary process. The most convenient way is to purchase ready-made channel modules.
We provide air flow into the house
As already mentioned, a modern wooden house is a practically sealed structure. Therefore, the flow of fresh air must be organized when installing ventilation in the house with your own hands. For this, another pipe is pulled, which should go out from the wall of the first floor. The inflow pipe outlets should be planned in residential areas. They are covered with bars, as well as the entrance from the street. In order to reduce the intensity of the air flow in winter, during the installation of ventilation in a private house with your own hands, the inlet is equipped with a shutter or shutters.
